RSS Auto Tool News Feeds

Die Cast 67 Beetle 29.99
1967 Yellow Volkswagen Beetle ... This is a 1:18 scale die cast and plastic reproduction of the 1967 Volkswagen Beetle. The Beetle was considered by most experts as the most desirable of all the Beetles, the 1967 combines the traditional early body design with a larger 1300cc engine and many other mechanical refinements.
read more:

B90 Volkswagen Only 314.00
This is a Volkswagen Kit only. Designed to accurately and efficientlyExtract or Install Hubs and Wheel Bearings of spindle assemblies. No Audi Components in this kit.

read more:

Volkswagen Only B90 314.00
This is a Volkswagen Kit only.
Designed to accurately and efficientlyExtract or Install Hubs and Wheel Bearings of spindle assemblies. No Audi Components in this kit.

read more:

Volkswagen Only 314.00
This is a Volkswagen Kit only. Designed to accurately and efficientlyExtract or Install Hubs and Wheel Bearings of spindle assemblies. No Audi Components in this kit.

read more:

Die Cast 67 Beetle Red 29.99
1967 Red Volkswagen Beetle ... This is a 1:18 scale die cast and plastic reproduction of the 1967 Volkswagen Beetle. The Beetle was considered by most experts as the most desirable of all the Beetles, the 1967 combines the traditional early body design with a larger 1300cc engine and many other mechanical refinements. This reproduction model has, opening hood, opening doors, opening trunk, adjustable front wheels, workable steering, spare tire and adjustable seats.
read more:

Brake Tool 25.00
NUMBER 3289Brake Release Tool Volkswagen VR6 JettaTool is used to disconnect brake pedal from booster.This is an Original VW Factory ToolMade in Germany for Volkswagen By Kukko*

read more:

Threaded Pin for T.D.C. 25.00
Locking Pin
TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6
For installing or removing toothed belt /flywheel drive plate.

read more:

Valve Tool for Volkswagen 61.95
Valve Tool for Volkswagen Valve Tool for VolkswagenThis unique tool has been designed to allow removal and installation of valve springs while the engine is still in the carType I, II III engines 40 HP and laterThis set will also remove springs on disassembled engines.

read more:

Spark Plug Boot Tool 32.99
Spark Plug Boot Tool
Due to restricted space the T10029 will install the spark plug boot properly.
VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire.
With the increased seal and location of the boot,
this tool has been made to access and remove the spark plug boot.
Tool is approximately 10 inches (250mm) long.
Used to pull off the spark plug socket...SOME APPLICATIONS INCLUDE: 2.8 2.9L VR6 engines
VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines.
This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but
T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL.
read more:

Crankshaft Gear Puller Volkswagen 86.50
Crankshaft Gear Puller for Volkswagen This inexpensive tool solves the problem of removing the crankshaft timing gear, a gear which must be removed when an engine is rebuilt and the main bearings are changed. In operation, this tool simply slips under the gear and with a twist of a wrench the gear is easily removed. The highest quality standards are used in the construction of this tool for years of repair shop service. To prevent damage to the end of the crankshaft, a ball bearing swivel is used, while for strength, the griping shoe is made of forged steel. For use on all type I, II, & III engines 40hp and later.

read more:

VW428A 49.99
Volkswagen 428a FACTORY TOOL MADE IN GERMANY

In Stock Now!
Call if you need more info on this tool.
read more:

Cam Bar and Pin for 2 Valve 139.50
Camshaft TimingTool Set (2)
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4  94 97 AFC Engine

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6

Please note: 3243 for 2 valves per cylinder. 

read more:

Cam Bar and Pin for 2 Valve 139.50
Camshaft TimingTool Set (2)
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4  94 97 AFC Engine

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6

Please note: 3243 for 2 valves per cylinder. 

read more:

Headbolt & Drain Plug Socket Set 28.00
TWO TOOLS!!!
Audi Headbolt Tool (LEFT)Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Plus Drain Plug Socket (right)Special Tamperproof Transmission Drain Plug Socket.Triple Square (12 Point XZN)Same as Volkswagen Tool 3357.For Porsche Boxster and Audi A4, A6 and Passat. Dont hesitate...these are BOTH the CORRECT tools for the job!

read more:

Headbolt & Drain Plug Socket Set 2 28.00
Drain Plug Socket
Plus Heabolt Tool
Details: Tamperproof Transmission Drain Plug Socket.
Triple Square (12 Point XZN)
Same as Volkswagen Tool 3357.
For Porsche Boxster and Audi A4, A6 and Passat.

Plus Audi Headbolt Tool
Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Set of 2 Audi Tools from ZDMAK

Dont hesitate...these are BOTH the CORRECT tools for the job!

read more:

Oil Seal Tool 42.50
Porsche Volkswagen Tool like 204BUsed for proper installationof oil seal on flywheel side of crank shaft. All VW Boxer 4.
read more:

Bar and Pin for 5 Valve 139.50
Camshaft Timing Tool Set (2)
TOOL REF 3391
Cam/Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 2002 4 cam.

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6Please note: 3391 for 5 valves per cylinder.

read more:

Heavy Duty Bench Clamp 187.50
313 Volkswagen Porsche Tool Designed for to securely carry the full weightof an air cooled twin turbo Boxer 6Tool Number VW 313Properly suited for a work bench.
read more:

Valve Adjustment * Deep Offset Wrench 5.99
German MadeDeep Offset 12 Point Spanner.This Exact item is no longer available from Germany.PORSCHE VW VALVE ADJUSTMENTTYPE 1, 2, 3 and 4 VOLKSWAGEN
read more:

Radio Removal Set 24.99
Set of Volkswagen Audi Radio Removal Tools Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box.
PLUS * Set Number vw 3316 Radio Removal Tools New Body Style Passat Jetta Golf Please check your manuals for details.
You will get virtually full VOLKSWAGEN coverage with this set
Plus BMW Radio Removal Tool.Pentagon shaped tool with 3 5/8 inches overall length.Applicable: Most BMWs.This Five sided driver is used to release anti theft radio mounts.YOU ALSO GET THE SPECIAL SMALL ALLEN (Right) side of picture FOR NEWER E38 & E39 7 SERIES
Plus * MERCEDES RADIO REMOVAL KEYS FOR NEWER AND OLDER VEHICLES

read more:

Power Steering Waterpump Pulley Tool 24.00
VA6024Power Steering and Waterpump Pulley Removal & Replacement Tool Volkswagen AudiUsed to hold the power steering or water pump pulley stationarywhile removing or replacing the three socket headbolts that attach pulley to the shaft.Tool is designed to be used on pulleys that utilize these socket head bolts.Applications:VW Audi 4 cylinder water cooled gas or diesel engines from 1975 to current.Volkswagen V6 1992 and newer.Audi power steering pump pulley V8 1990 and newer.Audi V6 1992 to current.Also VW 1983 to 1988 and Audi 1981 to 1995 with socket head boltsholding the pulley to power steering pump.

read more:

Spark Plug Boot Tool 24.99
Spark Plug Boot Tool
Due to restricted space the T10029 will install the spark plug boot properly.
VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire.
With the increased seal and location of the boot,
this tool has been made to access and remove the spark plug boot.
Tool is approximately 10 inches (250mm) long.
Used to pull off the spark plug socket on 2.8 2.9L VR6 engines
VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines.
This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but
T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL.

read more:

Press tool 401 0.00
High Quality German Made
Volkswagen Press Tool for assembly work.
Original Factory Tool.
read more:

Complete VW Audi Radio Keys 24.99
Set of Volkswagen Audi Radio Removal Tools Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box.
PLUS * Set Number vw 3316 Radio Removal Tools New Body Style Passat Jetta Golf Please check your manuals for details.
You will get virtually full VOLKSWAGEN coverage with this set
Plus BMW Radio Removal Tool.Pentagon shaped tool with 3 5/8 inches overall length.Applicable: Most BMWs.This Five sided driver is used to release anti theft radio mounts.YOU ALSO GET THE SPECIAL SMALL ALLEN (Right) side of picture FOR NEWER E38 & E39 7 SERIES
Plus * MERCEDES RADIO REMOVAL KEYS FOR NEWER AND OLDER VEHICLES

read more:

Puller Only 84.00
Puller Same as Volkswagen Tool 3032
Injection Pump ToolUsed for the proper extraction of injection pump drive gear.Applicable:VW Audi diesels *Excluding TDI
read more:

Volkswagen Filler Tool 5.99
NUMBER VW170Tool is for Air Cooled VW repair,and is designed to remove and installthe nut that holds the oil fillerand breather tin to the generator stand. Designed to snap over a 1/2 drive extension,this tool easily reaches down into the oil fill,to remove or tighten the hard to get at retaining nut.
read more:

Hazet Box Made in Germany 149.99
5 Tray Box
530 x 200 x 200mm.
Blue Stove Enameling
Super cool blue Hazet box Made in Germany for the Porsche and Volkswagen enthusiast.
read more:

Flywheel Lock 22.95
215 Volkswagen Porsche Tool
Flywheel Lockused to secure the crankshaft from rotating during R&R of motor.
Used in conjunction with Engine Holding Fixture P201,
where Flywheel Lock bolts into a machined channel.
All Porsche and VW 6V or 12V, air cooled.Please note: This item is included in the complete kit also.
read more:

Pinion Nut Cone 69.50
Like Volkswagen Tool 381/14Pinion Nut Cone Socket Cone shaped Socket with 1/2" drive.This tool is used for R&R of grooved nutwhich retains pinion bearing within its housing.Applicable: Early VW air cooled models.
read more:

36mm Flare Wrench 42.50
Special 36mm Flare Wrench like vw 179.Oil Line 12 Point Wrench for servicing Oil Lineson most 1977 and Later Porsche 911 and 944 Turbo.This tool is also used for adjusting rear suspension heighton 77 and Newer Porsche 911and for camber on most late model Volkswagen Bug.
read more:

Cylinder Head Tool Kit 23.50
Cylinder Head Alignment Kit Same as Volkswagen Tool 3070
Set comes with (2) pairs of guide pins, 11X1.75mm and 12X1.75mm.VW model Scirocco, Rabbit, Dasher, Fox. Audi model 4000, 5000
read more:

36mm Oil Filter Wrench 39.99
BMWMINI COOPER TOOL Mercedes Benzdiesel oil filter wrench.
This is the same as Mercedes item 606 589 01 09 00. Works on BMW and Mercedes
This tool is 6 point size 36mm shallow socket 3/8" drive.
Heavy duty construction. It is made by Hazet for Mercedes and BMW.
Good for engine OM606 used in 1995 W124 E300 diesel, 96 97 W210 E300 diesel,
and 1998 E300 turbodiesel. Also for MB Diesel Engines OM604, OM605
and BMW Mini, BMW M52 6 Cyl., M60 8 cyl., M70 12 cyl and Volkswagen VR6.
Some other applications include:
Mercedes diesel engines: OM604, OM605, OM606 1995 W124 E300 diesel,
1996 97 W210 E300 diesel, 1998 E300 turbo diesel.
BMW Mini Cooper, BMW M52 6 cyl, BMW M60 8 cyl, BMW M70 12 cyl.
VW Volkswagen VR6
Ford Truck 6.0L 2003 thru 2004

High Quality Hazet Tool Made in Germany!

read more:

36mm Oil Filter Socket Wrench 39.99
BMWMINI COOPER TOOL Mercedes Benzdiesel oil filter wrench.
This is the same as Mercedes item 606 589 01 09 00. Works on BMW and Mercedes
This tool is 6 point size 36mm shallow socket 3/8" drive.
Heavy duty construction. It is made by Hazet for Mercedes and BMW.
Good for engine OM606 used in 1995 W124 E300 diesel, 96 97 W210 E300 diesel,
and 1998 E300 turbodiesel. Also for MB Diesel Engines OM604, OM605
and BMW Mini, BMW M52 6 Cyl., M60 8 cyl., M70 12 cyl and Volkswagen VR6.
Some other applications include:
Mercedes diesel engines: OM604, OM605, OM606 1995 W124 E300 diesel,
1996 97 W210 E300 diesel, 1998 E300 turbo diesel.
BMW Mini Cooper, BMW M52 6 cyl, BMW M60 8 cyl, BMW M70 12 cyl.
VW Volkswagen VR6
Ford Truck 6.0L 2003 thru 2004

High Quality Hazet Tool Made in Germany!

read more:

Flywheel Lock 00
Universal Flywheel Lock
Designed for use on all air cooled Volkswagen engines
Type 1, 2, 3, & 4 and on all air cooled Porsche engines
(series 356, 912, 914, & all 911s through 1969).
This tool is a must when changing a flywheel or its seal
and it comes in handy when changing a clutch.
Made from a forging, this quality tool will last a lifetime.
read more:

17 x 17 Injection Wrench 39.50
Double Ended Flare Nut Box Wrench Size 17 x 17mmOverall Length 241mm (9.5 inch)For injection pipes on Volkswagen / Audi This tool will help you when you remove and install the fuel lines from the injection pump and the injectors themselves.For TDI: You will still need to torque the 17mm fittings down to spec, but this tool will make taking the fittings off a snap, as well as putting them back on.This is a Factory Tool Made in Germany
read more:

Spreader 28.99
SPREADING TOOL5TH GEAR LOCK PLATE 020 TRANSMISSION Ref: Volkswagen Tool 3097

read more:

2 Pins and 2 Plates 103.00
2 Pins and 2 Plates Set of four tools.VW Audi T.D.I. and New Beetle Cam Kit Reference numbers for the two tools on the left are: 3418 and 3359. Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pump on 1998 and newer VW models equipped with a T.D.I. engine. This two piece lock plate and alignment pin allows the technician for factory correct and trouble free installations.

Tools on the right side of image are Diesel Lock Plate / Cam Setting Bar Same as Volkswagen ref 2065a Tool used for securing the cam shaft from rotating and maintaining correct timing position engine AAZ during R&R of cam shaft drive belt. Applicable: VW/Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 Lock Pin for Diesel (Same as VW tool 2064). Tool used for securing Bosch diesel injection pump sprocket from rotating during R&R of cam shaft drive belt. This Locking Pin also assists in locating the general timing position of pump. Volkswagen Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 All 4 tools are High Quality Made in Europe!

read more:

Dipstick Funnel 4.99
Dipstick Funnel Volkswagen Audi used on many enines from 85 thru 99 item number 53103 663

read more:

Long Pattern Hex Set 4 13.50
4 Pc Long Allen Hex Set
Sizes include: 6, 7, 8, and 10mm Hex.
This set works well on several vehicles such as Audi, AMC, BMW,
Honda, Jaguar, Jeep, Saab, Volkswagen and Volvo.
3/8 Drive set of 4

read more:

Brake Caliper Rewind Set 47.99
U.S./EURO/ASIAN/4WD VEHICLES
Disc Brake Pad & Caliper Service Tool Kit
Includes 8 adapters Magnetic socket adapter.
For brake assemblies
For rotating pistons back into caliper to provide clearance for new pads
Prevents damage to the piston and bootDesigned for use with Mercedes, BMW, Volkswagen, GM, Audi, Ford,Honda, Subaru, Mazda, Nissan, Mitsubishi, Toyota, Land Rover and 4 wheel drive vehicles.Blow molded carryingcase for easy storage.
read more:

Power Steering Pump/Alternator Pulley Puller 29.50
Power Steering Pump/Alternator Pulley Puller
Removes power steering and alternator pulleys on selected applications of Chrysler, Ford, GM and Volkswagen with hub sizes of 1 1/8", 1 1/4", 1 5/16" and 1 3/8".
read more:

Valve Adjustment * Deep Offset Wrench 6.99
German MadeDeep Offset 12 Point Spanner.This Exact item is no longer available from Germany.PORSCHE VW VALVE ADJUSTMENTTYPE 1, 2, 3 and 4 VOLKSWAGEN

read more:

TDI Cam Tools 148.50
Volkswagen ref: T40001
First number 2510 1
Extractor (Puller)for the camshaft phasing gear with 5 and 6 spokes on 4 resp.
6 cylinder engines TDi, engines V6 and V8,
AUDI A 4, A 6, A 8
Second Item 2510 8 Extraction Hook
for the careful extraction of camshaft phasing gear with 5 spokes on VW/AUDI V8 carburetor engines.
Call if you have questions about this item.
read more:

VR6 Camshaft Alignment Tool 19.99
3268 Camshaft Alignment Volkswagen VR6This is an Original Matra Tool Made in Germany

read more:

Optical Tester Made in Germany 0.00
Super Optical Tester
Cooling System Special Tool
Hazet 4810 Made in Germany
for controlling the anti freezing acid concentration
in the cooling system, as well as for cooling fluid G11 and G12
VOLKSWAGEN/AUDI and the battery acid concentration (battery charging).
read more:

T45 Torx with U Joint 14.99
Torx size T45 Universal Joint Special Tool Torx T45 used for upper door hinge and other applications.VW Volkswagen Audi repair.Satin Chrome plated 3/8 drive

read more:

Puller 84.00
Puller Same as Volkswagen Tool 3032 Injection Pump ToolUsed for the proper extraction of injection pump drive gear.Applicable:VW Audi diesels *Excluding TDI

read more:

8mm Valve Guide Installer 9.99
8mm Valve Guide Installer for Volkswagen valve guides. The pilot holds the guide in the correct location while it is hammered or pressed into the head.

read more:

Injection Pump Puller 84.00
Puller Same as Volkswagen Tool 3032 Injection Pump ToolUsed for the proper extraction of injection pump drive gear.Applicable:VW Audi diesels *Excluding TDI

read more:


You Searched for

VOLKSWAGEN TDI

Click VOLKSWAGEN TDI to go to ZDMAK auto tools
SEARCH RSS NEWS USING THE WORDS BELOW

VOLKSWAGEN TDI | AUDI WORLD | AUDI CLUB | PORSCHE TUNING | PORSCHE CLUB | PORSCHE FORUM | VOLKSWAGEN FORUM | VW FORUM | BMW FORUM | AUDI FORUM | VW VORTEX | VW TUNING | VOLKSWAGEN TUNING | AUDI TUNING | VW REPAIR | AUDI REPAIR | BMW REPAIR | MERCEDES REPAIR | VOLKSWAGEN REPAIR | VOLVO REPAIR | PORSCHE REPAIR | VW CLUB | VOLKSWAGEN DIESEL | VW DIESEL | VW TDI | VOLKSWAGEN TDI |


Jade Gates Adobe Photoshop training Adobe Photoshop classes photography classes Polaroid image transfer classes Digital photography classes photo restoration classes commercial photography



www.zdmakautotools.com

(c) Copyright 2005 ZDMAK auto tools.

 

  Trade Links With ZDMAK