VOLKSWAGEN REPAIR VOLKSWAGEN REPAIR VOLVO REPAIR -- mmk4mkt

B90 for Volkswagen and Audi 377.00
Designed to accurately and efficientlyExtract or Install Hubs and Wheel Bearings of spindle assemblies.Applicable: All Front wheel drive VW (Water cooled) and Audifrom early 1970 to present with S.R.W.B. and I.F.S. including A.W.D.Pictures are for reference only. This is the Volkswagen Audi Kit. The Volkswagen kit "only" available below.
read more:

Volkswagen Filler Tool 5.99
NUMBER VW170Tool is for Air Cooled VW repair,and is designed to remove and installthe nut that holds the oil fillerand breather tin to the generator stand. Designed to snap over a 1/2 drive extension,this tool easily reaches down into the oil fill,to remove or tighten the hard to get at retaining nut.
read more:

Crankshaft Gear Puller Volkswagen 86.50

Crankshaft Gear Puller for Volkswagen This inexpensive tool solves the problem of removing the crankshaft timing gear, a gear which must be removed when an engine is rebuilt and the main bearings are changed. In operation, this tool simply slips under the gear and with a twist of a wrench the gear is easily removed. The highest quality standards are used in the construction of this tool for years of repair shop service. To prevent damage to the end of the crankshaft, a ball bearing swivel is used, while for strength, the griping shoe is made of forged steel. For use on all type I, II, & III engines 40hp and later.

STRUT ALIGNMENT LEVEL 29.99
STRUT ALIGNMENT LEVEL
Use this level to restore a vehicles camber setting after strut repair or installation. Allows technician or customer to safely drive the vehicle before a more precise wheel alignment can be performed. Super strong magnet mounts on brake rotor, spindle or steering knuckle. Easy to use: (1)Place on vehicle before repair and zero the level. (2)Tighten the wing nut. (3)After the repair, push or pull on the strut until the level returns to the zero position.
read more:

T45 Torx with U Joint 14.99

Torx size T45 Universal Joint Special Tool Torx T45 used for upper door hinge and other applications.VW Volkswagen Audi repair.Satin Chrome plated 3/8 drive

B90 for Volkswagen Audi 377.00

Designed to accurately and efficientlyExtract or Install Hubs and Wheel Bearings of spindle assemblies.Applicable: All Front wheel drive VW (Water cooled) and Audifrom early 1970 to present with S.R.W.B. and I.F.S. including A.W.D.Pictures are for reference only. This is the Volkswagen Audi Kit. The Volkswagen kit "only" available below.

BMW Motorcycle Tire Kit 29.99

BMW Motorcycle Tire Kit Replacement Tire Repair Kit Stores easily in tool compartment. Highly recommended for long rides.
Replace damaged tire as soon as possible.
NOTE: If the damaged area is smaller than 0.16 inches (4mm) in diameter, use this Tire Repair Kit.
Maximum permitted speed after repair is 37 mph (60 kph).
Maximum permitted distance with a repaired tire is 250 miles (400 km).

Volvo Clutch Tool 6.99

Volvo Clutch Alignment Tool (Diesel D24)Clutch tool is extremely durable long lasting and inexpensive. These tools can be used over and over again.A must for clutch repair shop, clutch specialist, transmission repair shops, automotive stores, school shop classes, clutch resellers, foreign and domestic repair shops.

Saab Set 3 Clutch Tools 13.99

Set of 3 Clutch Alignment Tools Covers a wide variety of Saab Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.

Set 3 Porsche Clutch Tools 13.99

Set of 3
Porsche Clutch Alignment Tools
Covers a BIG variety of Porsche Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.

Die Cast 67 Beetle 29.99
1967 Yellow Volkswagen Beetle ... This is a 1:18 scale die cast and plastic reproduction of the 1967 Volkswagen Beetle. The Beetle was considered by most experts as the most desirable of all the Beetles, the 1967 combines the traditional early body design with a larger 1300cc engine and many other mechanical refinements.
read more:

BMW Cluth Pilot 6.99

BMW Clutch Alignment Tool
The ZDMAK clutch tools are extremely durable
long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.Read more about this toolClickHere

Set 3 BMW Clutch Tools 13.99

Set of 3
BMW Clutch Alignment Tools
Covers a BIG variety of BMW Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.
Readmore about this 3 piece Click Here

BMW Clutch Tool 6.99

SPARK PLUG REPAIR KIT 119.99
LONG REACH SAV A THREAD SPARK PLUG REPAIR KITHeli Coil inserts can be used in any material: cast iron, steel, copper,brass, bronze, aluminum, magnesium, plastics and wood. After installation, theynever shift, wear or back out. Stripping, fatigue, corrosion, crossthreading andseizing are eliminated. Heli Coil thread repairs provide freedom from wearafter repeated assembly and disassembly.
read more:

B90 Volkswagen Only 314.00

This is a Volkswagen Kit only. Designed to accurately and efficientlyExtract or Install Hubs and Wheel Bearings of spindle assemblies. No Audi Components in this kit.

Volkswagen Only B90 314.00

This is a Volkswagen Kit only.
Designed to accurately and efficientlyExtract or Install Hubs and Wheel Bearings of spindle assemblies. No Audi Components in this kit.

Volkswagen Only 314.00

This is a Volkswagen Kit only. Designed to accurately and efficientlyExtract or Install Hubs and Wheel Bearings of spindle assemblies. No Audi Components in this kit.

Inner Ball Joint Repair Kit 166.00

Set used for proper removal and installation of inner ball joint of control arm.For on the car repair, requires this set to be used in conjunction with a C Clamp.Or to be used in conjunction with Hydraulic Press. Applicable Chassis: E30 and E36.

INNER BALL JOINT REPAIR 166.00

Die Cast 67 Beetle Red 29.99
1967 Red Volkswagen Beetle ... This is a 1:18 scale die cast and plastic reproduction of the 1967 Volkswagen Beetle. The Beetle was considered by most experts as the most desirable of all the Beetles, the 1967 combines the traditional early body design with a larger 1300cc engine and many other mechanical refinements. This reproduction model has, opening hood, opening doors, opening trunk, adjustable front wheels, workable steering, spare tire and adjustable seats.
read more:

Brake Tool 25.00

NUMBER 3289Brake Release Tool Volkswagen VR6 JettaTool is used to disconnect brake pedal from booster.This is an Original VW Factory ToolMade in Germany for Volkswagen By Kukko*

Threaded Pin for T.D.C. 25.00

Locking Pin
TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6
For installing or removing toothed belt /flywheel drive plate.

Auto Repair for Dummies 24.99
Some of us dont know the first thing about the machines we are licensed to drive and this can turn a ticket to freedom into a ticket to trouble. If youre like most people, you probably tend to drive around until something goes wrong with the car. You then incur the expense of replacing worn and burnt out parts (or the entire engine) when low cost, regular maintenance could have kept your wheels turning for a long time.
This book shows you how your car works; what it needs in the way of tender loving care; and how to keep from being overcharged if you need to entrust repairs to someone else. Auto Repair For Dummies also gives you the scoop on these topics and more: What makes your vehicle go (and how and why) A program of "preventive medicine" to avoid trouble Shopping for tools and knowing how to use them Diesel engines and alternatively powered cars How to keep your car looking its best Dealing with on road emergencies Checking your tires, alignment, and steering.
read more:

Valve Tool for Volkswagen 61.95

Valve Tool for Volkswagen Valve Tool for VolkswagenThis unique tool has been designed to allow removal and installation of valve springs while the engine is still in the carType I, II III engines 40 HP and laterThis set will also remove springs on disassembled engines.

Saab Rigid Valve Spring Compressor 58.50

This Unique "On the Car" Rigid Valve Spring Compressor was designed to do away with conventional Lever based or C Clamp type mechanisms. The side by side threaded compressors inherent design allows the technician to have hands free to work with, and safely and easily maintain the Valve Spring to a fully compressed position, and to repair Valve Stem Seals without removing the Heads. This unit will cut repair time considerably.Will work on Saab 900, 9000, 9 3, 9 5 Double Overhead Cam Engines From early to later models.

BMW Thread Repair Kit 0.00
Thread Repair Kit
for BMW
Solid bushing insert. This guarantees easyinstallation and allows for full load use of tapped hole, ensuringprotection against stress and vibration.
Thin walled due to synchronized internalexternal threads. Thin cross sectional area allows for installationin areas of limited space and clearance material.
Self positioning. Having a flange on the top of the insert will insure that the insert will have positive placement and cannot wind down into the newly repaired hole.
Self locking. On installation the bottominternal threads of the insert are cold rolled to expand themating external threads into the base material locking the insert in place.
Call or email for availability. Read more about the kits that are available...For other kits and insert sizes read the chartHere
read more:

Set 2 Alternator Tools 47.00

Combo Socket Set of 2 consisting of the 17mm Multi Spline Adapter and XZN (12 Point) Socket size M10 for mounting and dismounting the alternator pulley at the generator.Volkswagen Audi Mercedes Porsche etc...For mounting the V belt pulley (slip clutch pulley) at the alternator (manuals call it a generator), especially for T.D.I. VW Golf III, Vento, Passat and AUDI A 3 .
The short serrated socket (3400) is size 17MM outside diameter and Length is 30mm.
The larger tool is M10 XZN triple square and is 1/2 drive x 140mm Length.Also for Boxster. (See repair Group 27 (Porsche Bulletins) Boxster Alternators with free wheeling Pulleys. High Quality Tool

Also: 1990 to 1994 porsche C2 and C4 and all porsche 993s use a (M10) 10mm 12point socket tool to hold the alternator shaft when replacing the belts the area between the alternator and car body is very limited a 10mm 12point spanner style wrench works well for this job.

VW Thread Repair Kit 0.00
Thread Repair Kit
for VW Audi
Solid bushing insert. This guarantees easyinstallation and allows for full load use of tapped hole, ensuringprotection against stress and vibration.
Thin walled due to synchronized internalexternal threads. Thin cross sectional area allows for installationin areas of limited space and clearance material.
Self positioning. Having a flange on the top of the insert will insure that the insert will have positive placement and cannot wind down into the newly repaired hole.
Self locking. On installation the bottominternal threads of the insert are cold rolled to expand themating external threads into the base material locking the insert in place.
Call or email for availability. Read more about the kits that are available...For other kits and insert sizes read the chartHere
read more:

Ford Thread Repair Kit 0.00
Thread Repair Kit
for Ford
Solid bushing insert. This guarantees easyinstallation and allows for full load use of tapped hole, ensuringprotection against stress and vibration.
Thin walled due to synchronized internalexternal threads. Thin cross sectional area allows for installationin areas of limited space and clearance material.
Self positioning. Having a flange on the top of the insert will insure that the insert will have positive placement and cannot wind down into the newly repaired hole.
Self locking. On installation the bottominternal threads of the insert are cold rolled to expand themating external threads into the base material locking the insert in place.
Call or email for availability. Read more about the kits that are available...For other kits and insert sizes read the chartHere
read more:

Spark Plug Boot Tool 32.99
Spark Plug Boot Tool
Due to restricted space the T10029 will install the spark plug boot properly.
VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire.
With the increased seal and location of the boot,
this tool has been made to access and remove the spark plug boot.
Tool is approximately 10 inches (250mm) long.
Used to pull off the spark plug socket...SOME APPLICATIONS INCLUDE: 2.8 2.9L VR6 engines
VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines.
This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but
T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL.
read more:

VW428A 49.99
Volkswagen 428a FACTORY TOOL MADE IN GERMANY

In Stock Now!
Call if you need more info on this tool.
read more:

Thread Repair Kit 10 x 1.5 59.99
Thread Repair Kit
(For Mercedes Benz and many other vehicle applications)Timesert Kit for rethreading case. Size 10x1.5 (Length of insert 24.5mm)
Solid bushing insert. This guarantees easyinstallation and allows for full load use of tapped hole, ensuringprotection against stress and vibration.
Thin walled due to synchronized internalexternal threads. Thin cross sectional area allows for installationin areas of limited space and clearance material.
Self positioning. Having a flange on the top of the insert will insure that the insert will have positive placement and cannot wind down into the newly repaired hole.
Self locking. On installation the bottominternal threads of the insert are cold rolled to expand themating external threads into the base material locking the insert in place.
Call or email for availability. Read more about the kits that are available...For other kits and insert sizes read the chartHere
read more:

Fence Plier 11.50
Fence Repair Plier with Hammer Head, Pick end, wire cutters, etc..With comfort grip Handles
read more:

Cam Bar and Pin for 2 Valve 139.50

Camshaft TimingTool Set (2)
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4  94 97 AFC Engine

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6

Please note: 3243 for 2 valves per cylinder. 

Cam Bar and Pin for 2 Valve 139.50

Headbolt & Drain Plug Socket Set 28.00

TWO TOOLS!!!
Audi Headbolt Tool (LEFT)Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Plus Drain Plug Socket (right)Special Tamperproof Transmission Drain Plug Socket.Triple Square (12 Point XZN)Same as Volkswagen Tool 3357.For Porsche Boxster and Audi A4, A6 and Passat. Dont hesitate...these are BOTH the CORRECT tools for the job!

Headbolt & Drain Plug Socket Set 2 28.00

Drain Plug Socket
Plus Heabolt Tool
Details: Tamperproof Transmission Drain Plug Socket.
Triple Square (12 Point XZN)
Same as Volkswagen Tool 3357.
For Porsche Boxster and Audi A4, A6 and Passat.

Plus Audi Headbolt Tool
Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Set of 2 Audi Tools from ZDMAK

Dont hesitate...these are BOTH the CORRECT tools for the job!

Oil Seal Tool 42.50
Porsche Volkswagen Tool like 204BUsed for proper installationof oil seal on flywheel side of crank shaft. All VW Boxer 4.
read more:

Bar and Pin for 5 Valve 139.50

Camshaft Timing Tool Set (2)
TOOL REF 3391
Cam/Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 2002 4 cam.

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6Please note: 3391 for 5 valves per cylinder.

Heavy Duty Bench Clamp 187.50
313 Volkswagen Porsche Tool Designed for to securely carry the full weightof an air cooled twin turbo Boxer 6Tool Number VW 313Properly suited for a work bench.
read more:

Valve Adjustment * Deep Offset Wrench 5.99
German MadeDeep Offset 12 Point Spanner.This Exact item is no longer available from Germany.PORSCHE VW VALVE ADJUSTMENTTYPE 1, 2, 3 and 4 VOLKSWAGEN
read more:

Auto Electrical Systems 34.99
Automotive Electrical Systems Troubleshooting and Repair BasicsDesigned to take the mystery out of the sophisticated electrical systems found into todays automobiles. 250 pages, soft cover.
read more:

Radio Removal Set 24.99

Set of Volkswagen Audi Radio Removal Tools Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box.
PLUS * Set Number vw 3316 Radio Removal Tools New Body Style Passat Jetta Golf Please check your manuals for details.
You will get virtually full VOLKSWAGEN coverage with this set
Plus BMW Radio Removal Tool.Pentagon shaped tool with 3 5/8 inches overall length.Applicable: Most BMWs.This Five sided driver is used to release anti theft radio mounts.YOU ALSO GET THE SPECIAL SMALL ALLEN (Right) side of picture FOR NEWER E38 & E39 7 SERIES
Plus * MERCEDES RADIO REMOVAL KEYS FOR NEWER AND OLDER VEHICLES

Power Steering Waterpump Pulley Tool 24.00

VA6024Power Steering and Waterpump Pulley Removal & Replacement Tool Volkswagen AudiUsed to hold the power steering or water pump pulley stationarywhile removing or replacing the three socket headbolts that attach pulley to the shaft.Tool is designed to be used on pulleys that utilize these socket head bolts.Applications:VW Audi 4 cylinder water cooled gas or diesel engines from 1975 to current.Volkswagen V6 1992 and newer.Audi power steering pump pulley V8 1990 and newer.Audi V6 1992 to current.Also VW 1983 to 1988 and Audi 1981 to 1995 with socket head boltsholding the pulley to power steering pump.

Spark Plug Boot Tool 24.99

Spark Plug Boot Tool
Due to restricted space the T10029 will install the spark plug boot properly.
VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire.
With the increased seal and location of the boot,
this tool has been made to access and remove the spark plug boot.
Tool is approximately 10 inches (250mm) long.
Used to pull off the spark plug socket on 2.8 2.9L VR6 engines
VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines.
This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but
T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL.

Press tool 401 0.00
High Quality German Made
Volkswagen Press Tool for assembly work.
Original Factory Tool.
read more:

Complete VW Audi Radio Keys 24.99

Puller Only 84.00
Puller Same as Volkswagen Tool 3032
Injection Pump ToolUsed for the proper extraction of injection pump drive gear.Applicable:VW Audi diesels *Excluding TDI
read more:

Hazet Box Made in Germany 149.99
5 Tray Box
530 x 200 x 200mm.
Blue Stove Enameling
Super cool blue Hazet box Made in Germany for the Porsche and Volkswagen enthusiast.
read more:

You Searched for

VOLKSWAGEN REPAIR

Trade Links With ZDMAK